Operating The Device Safely - Waeco CoolAir SP-900 Instrucciones De Uso

All manuals and user guides at all-guides.com
BA_SP-900.book Seite 21 Montag, 14. April 2008 9:48 09
CoolAir SP-900 Safety instructions
Do not use the air conditioner if it is visibly damaged.
Installation, maintenance and repairing of the air conditioner
may only be carried out by qualified personnel who are familiar
with the risks involved and the relevant regulations. Inadequate
repairs can cause considerable hazards.
If your device needs repairing, please get in touch with installa-
tion operations or the service centre in your country (addresses
on the back).
Switch the air conditioner off before tilting the cab.
Do not use the air conditioner near flammable fluids and gases.
Do not operate the air conditioner if the ambient temperature is
below 0 °C.
Do not open the air conditioner in the event of a fire. Use the
approved extinguishing agents instead. Do not use water to
extinguish fires.
Disconnect all power supply lines when working on the air con-
ditioner (cleaning, maintenance etc.).
2.2

Operating the device safely

Do not insert foreign objects into the system.
Operate the device only if you are certain that the housing and
the cables are undamaged.
Avoid any mechanical stress to the supply line between the evap-
orator unit and the condenser unit. Damage to the supply line can
result in loss of refrigerant and impair the performance of the sys-
tem or cause direct damage to other parts of the system.
21