Technical Data - Hilti C 4/36-MC4 Manual De Instrucciones

All manuals and user guides at all-guides.com
Battery charge state
LEDs
LEDs 1 to 4 blink first and
then light to indicate the
battery's state of charge.
Off
Off
Off
3.3.2 Li-ion battery charge state display
Status
3 LEDs light, 1 LED blinks.
2 LEDs light, 1 LED blinks.
1 LED lights, 1 LED blinks.
1 LED blinks.
3.4 Items supplied
Charger, operating instructions.
4

Technical data

Output voltage
Weight
Output power 100...127 V
220...240 V
5 Operation
5.1 Switching the charger on
▶ Plug the supply cord into the power outlet.
◁ The green supply voltage LED on the charger lights.
5.2 Inserting and charging the batteries
The batteries are charged in the order in which they are inserted, unless electric power to the charger
is interrupted. As soon as electric power returns, the battery on the left (interface 1) will be charged
first, followed consecutively by the other batteries in interfaces 2 to 4 in numerical order.
For safety reasons it is recommended that the battery is removed from the charger after completion
of the charging cycle.
When charging of a battery is complete, the charge state display on the battery goes out and the
charge status LED on the charger lights.
Li­ion batteries are ready for use at any time, even when only partly charged. Charging progress is
indicated by the charge state LED display on the battery.
1. Before inserting the battery, check that the contacts are clean and free from grease.
2. Push the battery into the interface provided.
3. Check that the battery and charger interfaces match (keyed fit).
◁ The battery is identified by the charger when fully inserted and engaged. As charging begins
according to the order of insertion, each battery will begin charging in turn.
2114855
*2114855*
Printed: 21.06.2018 | Doc-Nr: PUB / 5253121 / 000 / 05
Charge status LED Battery temperature
LED
Blinks Off
Lights Off
Off Blinks
Off Lights
2
Meaning
•
•
•
•
C 4/36-MC4
7.2 V ... 36 V
1.7 kg
90 W
90 W
3
Description
The battery is charging.
The battery is fully charged.
Battery temperature is
outside the permitted range
(too hot, too cold).
Battery malfunction,
charger malfunction.
Charge state: 75 % to 100 %
Charge state: 50 % to 75 %
Charge state: 25 % to 50 %
Charge state: < 25 %
English 13