Festo VTSA-ASI-4E4A-Z Serie Instrucciones Para El Usuario página 17

All manuals and user guides at all-guides.com
1 User
Valve terminal type VTSA−ASI−...−4E4A−Z has been designed
exclusively for controlling pneumatic actuators and is only
suitable for use in bus systems in accordance with the
AS−Interface specifications. If additional commercially−
available components are connected, the specified limits
for pressures, temperatures, electrical data, torques, etc.
must not be exceeded.
The valve terminal enables the control of 4 valve solenoid
coils and the registering of 4 sensors. The exchangeable
connections of the CPX system are used for connecting the
sensors.
AS−Interface bus systems and valve terminals may only be
installed by personnel especially trained for this purpose.
Specifications on the design and addressing of your bus sys
tem can be found in the manual for the AS−Interface master.
Detailed information on the pneumatic components of the
valve terminal can be found in the Pneumatics manual type
P.BE−VTSA−...
Caution
S Switch off the power supply before connecting or
disconnecting plugs (otherwise this could lead to
functional damage).
S Commission only a valve terminal which has been
fitted and wired completely.
S Connect the earthing cable between the adapter
module and the multipin node.
S Switch on the power supply only if the DIL switch is
positioned at a permitted setting.
Festo VTSA−ASI−...−4E4A−Z 0802NH English
instructionsEnglish
17