Beko HCA63640B Manual Del Usuario página 27

3
Install ng your appl ance
3.2.2 Hammer ng the wall plugs
Hammer Ø 8 mm wall plugs (X,Y) into the holes
drilled for hanger screws. Hammer 2 x Ø 6 mm
wall plugs (Z) into the holes drilled with a Ø 6
mm bit for the external flue connection plate.
(Figure 5)
3.2.3 Install ng the hanger
screws
Install 4.9x50 hanger screws into the Ø 8 mm wall
plugs (Y) you have hammered into the wall. There
must be a gap of 5 mm between the screw head
and the wall. (Figure 5)
Connect the internal flue connection plate to the
8 mm wall plugs (Z) on the wall using Ø 3.9x22
screws. (Figure 5)
4.9x50 Cross- 3.9 x 22 Cross-head
head screw screw
(Figure 5)
3.2.4 Hang ng the hood onto the
wall
• Hang the hood onto the screws you have in-
stalled into the Y holes.
• Open the side suction window of the hood by
pulling it towards yourself. Install the 4.9x50
screws through the X holes located inside in
order to secure the appliance.
Hood / User Manual
All manuals and user guides at all-guides.com
Z
Z
Y
X Y
X
27 / EN