Starting The Programme; Child Lock - Beko WMB 81242 PTMNX Manual Del Usuario

Changing the delayed start period
If you want to change the time during countdown:
Press Start / Pause / Cancel button. ":" sign in the middle of
the delayed start time on the display stops flashing. Pause
symbol appears. Delayed Start symbol flashes. Start symbol
disappears. Set the desired delayed start time by pressing
the Delayed Start + or - buttons. Press Start / Pause /
Cancel button. Delayed Start symbol illuminates steadily.
Pause symbol disappears. Start symbol appears. ":" sign
in the middle of the delayed start time on the display starts
flashing.
Cancelling the Delayed Start function
If you want to cancel the delayed start countdown and start
the programme immediately:
Press Start / Pause / Cancel button. ":" sign in the middle
of the delayed start time on the display stops flashing. Start
symbol disappears. Pause symbol and Delayed Start symbol
flashes. Decrease the delayed start time by pressing the
Delayed Start - button. Programme duration appears after
30 minutes. Press Start / Pause / Cancel button to start the
programme.

4.13 Starting the programme

Press Start / Pause / Cancel button to start the programme.
Start symbol showing the startup of the programme will turn
on. Loading door is locked and Door Locked symbol appears
on the display. The symbol of the step from which the
programme has started appears on the display (Prewash,
Main Wash, Rinse, Softener and Spin).
4.14 Progress of programme
Progress of a running programme is indicated on the display
with a set of symbols.
Relevant symbol appears on the display at the beginning of
each programme step and all symbols remain lit at the end
of the programme. The farthermost right symbol indicates
the current programme step.
Prewash
If the Prewash auxiliary function is selected, Prewash symbol
appears on the display indicating that the prewash step has
started.
Main Wash
Main Wash symbol indicating that the main wash step has
started appears on the display.
Rinse
Rinse symbol indicating that the rinsing step has started
appears on the display.
Softener
Softener symbol indicating that the softener step has started
appears on the display.
Spin
Appears at the beginning of the final spin step and remains
lit during Spin and Pump special programmes.
C
If the machine does not pass to the spinning step,
Rinse Hold function might be active or the automatic
unbalanced load detection system might be activated
due to the unbalanced distribution of the laundry in the
machine.
14 / 79 EN
All manuals and user guides at all-guides.com
4.15 Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases when
the water level is unsuitable.
Door Locked symbol appears when the loading door is
locked. This symbol will flash until the loading door becomes
ready to open when programme completes or the machine
is paused. Do not force to open the loading door in this step.
Symbol disappears when the door is ready to open. You can
open the door when the symbol disappears.
4.16 Changing the selections after
programme has started
Switching the machine to pause mode
Press the Start / Pause / Cancel button to switch the
machine to pause mode. Pause symbol appears on the
display indicating that the machine is paused. Start symbol
disappears.
Changing the speed and temperature settings for
auxiliary functions
Depending on the step the programme has reached, you
may cancel or activate the auxiliary functions; see, "Auxiliary
function selection".
You may also change the speed and temperature settings;
see, "Spin speed selection" and "Temperature selection".
Adding or taking out laundry
Press the Start / Pause / Cancel button to switch the
machine to pause mode. The programme follow-up light of
the relevant step during which the machine was switched
into the pause mode will flash. Wait until the Loading Door
can be opened. Open the Loading Door and add or take
out the laundry. Close the Loading Door. Make changes
in auxiliary functions, temperature and speed settings if
necessary. Press Start / Pause / Cancel button to start the
machine.
C

4.17 Child Lock

Use Child Lock function to prevent children from tampering
with the machine. Thus you can avoid any changes in a
running programme.
C
To activate the Child Lock:
Press and hold 2
seconds. "Con" appears on the display.
C
To deactivate the Child Lock:
Press and hold 2
seconds. "COFF" appears on the display.
C
The loading door will not open if the water temperature
in the machine is high or the water level is above the
door opening.
You can switch on and off the machine with On / Off
button when the Child Lock is active. When you switch
on the machine again, programme will resume from
where it has stopped.
and 4 Auxiliary Function buttons for 3
nd th
Same phrase will appear on the display if you press
any button when Child Lock is enabled.
and 4 Auxiliary Function buttons for 3
nd th
Do not forget to disable the child lock at the end of
the programme if it was enabled before. Otherwise,
machine will not allow to select a new programme.
Washing Machine / User's Manual