Descargar Imprimir esta página

Bresser junior 8851310 Instrucciones De Uso página 14

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
Take a few larvae from the container each day and observe them under
the microscope. In case you've hatched the larvae in a hatchery, simply
take off the cover of the tank and place the tank on the stage.
Depending on the room temperature, the larvae will be mature in 6-10
weeks. Soon, you will have had raised a whole generation of brine shrimp,
which will constantly grow in numbers.
Feeding your Brine Shrimp
In order to keep the brine shrimp alive, they must be fed from time to
time, of course. This must be done carefully, since overfeeding can make
the water become foul and poison our shrimp population. The feeding
is done with dry yeast in powdered form. A little bit of this yeast every
second day is enough. If the water in the compartments of the hatchery
or your container turns dark, that is a sign that it is gone bad. Take the
shrimp out of the water right away and place them in a fresh salt solution.
Warning!
The shrimp eggs and the shrimp are not meant
to be eaten!
14
Notes on Cleaning
• Before cleaning the device, disconnect it from the power supply by
removing the batteries.
• Only use a dry cloth to clean the exterior of the device. To avoid
damaging the electronics, do not use any cleaning fluid.
• Protect the device from dust and moisture.
• The batteries should be removed from the unit if it has not been used
for a long time.
EC Declaration of Conformity
Bresser GmbH has issued a „Declaration of Conformity" in
accordance with applicable guidelines and corresponding
standards. The full text of the EC declaration of conformity is
available at the following internet address:
www.bresser.de/download/8851310/CE/8851310_CE.pdf
UKCA Declaration of Conformity
Bresser GmbH has issued a „Declaration of Conformity" in
accordance with applicable guidelines and corresponding
standards. The full text of the UKCA declaration of conformity
is available at the following internet address:
www.bresser.de/download/8851310/UKCA/8851310_UKCA.pdf
Bresser UK Ltd.
Suite 3G, Eden House, Enterprise Way, Edenbridge,
Kent TN8 6HF, Great Britain

Publicidad

loading