Zipro Rook Gold Manual De Uso página 23

EN
TRANSPORT PACKAGING HANDLING MARKS
OPERATION
Make sure the device has been assembled correctly before starting the training.
• Before your first training, get familiar with all the functions and adjustments available for the device.
•
Some parts of the device may corrode. It is, therefore, inadvisable to leave the device in a room with
a high moisture content. Take care not to allow the device (in particular internal and electronic
components) to be exposed to water, beverages, sweat, etc.
• The device is intended for adult training and is NOT a toy. If you allow children to use it at your own
discretion, you must provide them with instructions of appropriate use and ensure constant
supervision.
•
This is not a therapeutic device.
• Slight humming noise may be heard during operation due to the inertial movement of the flywheel
caused by the structure. It does not affect the operation of the device. For exercise bikes and
elliptical trainers, any possible humming noises heard when rotating the pedals backwards occur
for technical reasons and have no negative consequences.
•
Noise emissions are greater when loaded.
• Before each training, make sure the protective devices are operational and bolt and plug
connections are tight.
•
Wear appropriate (sports) shoes during the training.
ASSEMBLY
The device must be assembled carefully by an adult. In case of doubt, ask a more experienced person for
help.
• Prior to the assembly, make sure the set contains all the listed elements and whether none of the
parts was damaged during transport. If any parts are missing or you have any other reservations,
contact the seller.
• Have a look at the drawings and explanations and follow the assembly manual when assembling the
device.
• Be careful during the assembly. There is a risk of injury when using the tools and parts.
23
This side up. Do not tip over.
Fragile. Prone to damage. Proceed with caution.
Handle with care.
Protect from humidity.
Recyclable packaging.
Attention, heavy product.