Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

H-995
VINYL DUNNAGE
INFLATOR GUN
1. Twist cap off to open valve. (See Figure 1)
Figure 1
2. Make sure inner valve is closed. Valve is closed when
the center pin is in the upright position. If open, turn
cross clockwise until the spring pops up, closing the
valve. (See Figure 2)
Figure 2
3. Press and hold the trigger to inflate the bag. Do not
release the trigger; the bag cannot over-inflate.
(See Figure 3)
Figure 3
PAGE 1 OF 3
1-800-295-5510
uline.com
INFLATION
4. When air can be felt exiting the back of the gun,
the Dunnage Bag is inflated and the gun may be
removed. (See FIgure 4)
Figure 4
5. Wait until the gun is completely removed before
releasing the trigger. (See Figure 5)
Figure 5
6. Close the cap on the valve. (See FIgure 6)
Figure 6
Para Español, vea página 2.
Pour le français, consulter la page 3.
0421 IH-995

Publicidad

loading

Resumen de contenidos para Uline H-995

  • Página 1 Para Español, vea página 2. Pour le français, consulter la page 3. H-995 1-800-295-5510 uline.com VINYL DUNNAGE INFLATOR GUN INFLATION 1. Twist cap off to open valve. (See Figure 1) 4. When air can be felt exiting the back of the gun, the Dunnage Bag is inflated and the gun may be removed.
  • Página 2 H-995 800-295-5510 uline.mx PISTOLA PARA INFLAR BOLSAS DE VINIL PARA CARGA INFLADO 1. Gire la tapa para abrir la válvula. (Vea Diagrama 1) 4. Cuando se sienta aire saliendo por la parte posterior de la pistola, la bolsa de aire para carga estará...
  • Página 3 H-995 1-800-295-5510 uline.ca PISTOLET GONFLEUR POUR SACS DE FARDAGE EN VINYLE GONFLAGE 1. Tournez le bouchon pour ouvrir la valve. 4. Lorsque vous sentez l’air sortir de l’arrière du pistolet, (Voir Figure 1) le sac à fardage est gonflé et le pistolet peut être retiré.