Troubleshooting - Fagor HPM-199 Serie Manual De Utilización

All manuals and user guides at all-guides.com
99633311 notice FAGOR 2004_ML.qxd
T
roubleshooting
If you're not sure that your oven is working properly, it doesn't necessarily
mean that there's a problem. In all cases, check the following points:
I
f you realize that..
The oven isn't heating.
The temperature light does not
go out.
The light inside the oven isn't
working.
The cooling fan keeps working
after the oven is turned off.
Cleaning by pyrolysis has not
occurred.
22/06/04 10:08 Page 105
P
ossible causes
• The oven isn't connected to the
power supply.
• The fuse has blown.
• The temperature selected is too low.
• The sensor is faulty
• The oven has overheated. It has
been put out of use for safety
reasons.
• The temperature sensor is faulty.
• The lamp is unusable.
• The oven isn't connected to the
power supply or the fuse has
blown.
• The fan can keep working for up
to an hour after the oven switches
off if is over 125ºC.
• If it has not stopped after 1 hour
• The door is not shut properly.
• The door-locking system is faulty.
• The temperature sensor is faulty.
• The plate that detects when the
door is shut is faulty.
W
hat should you do?
- Connect to power supply.
- Change the fuse, checking that it is
16A.
- Increase the temperature selected.
- Contact the After-Sales Service.
- Contact the After-Sales Service.
- Contact the After-Sales Service.
GB
- Change the bulb.
- Connect to power supply or
change fuse.
- Open the door to help the oven
cool down more quickly.
- Contact the After-Sales Service.
- Check the door is properly closed.
- Contact the After-Sales Service.
- Contact the After-Sales Service.
- Contact the After-Sales Service.
105