Controls And Indicators; Autostart - Blueair DustMagnet 5210i Manual Del Usuario

Controls and indicators

Control the air purifier using the buttons on the control panel or using the Blue air app.
The LED light below the symbol indicates active status.
On/O
Press to turn On or O .
Note! Wi-Fi continues to be in operation when the air purifier is turned o .
Airflow speed
Available airflow speed options are: 0, 1, 2, 3, Auto mode and Night mode.
Press to switch between airflow speed options, Auto mode and Night mode.
Auto mode
In Auto mode the air purifier automatically controls the airflow based on air quality
information from the sensor.
Night mode
In Night mode the air purifier uses low fan speed and dimmed LED lights. The
brightness of the LED is possible to set in the Blueair app.

Autostart

The air purifier has an Autostart feature. This means that the unit will automatically restart at
the set speed if a power failure occurs, the unit is unplugged or a power switch timer is used.
11