Setting.the.alarm; To Set Alarm Time; Activate.alarm.function - LEXIBOOK TimeProjector RP170 Manual De Instrucciones

8.. Press.the.SET/WAVE button to confirm and enter the time setting.
9. The time display will blink; press the + or - buttons to set the time.
Holding.the.+.or.–.buttons.will.make.the.setting.scroll.faster.
10..Press.the.SET/WAVE button to confirm and enter the 12/24 Hr and
ºC/.ºF.display.format.setting.
11. The time field and temperature field will blink. Press + to toggle
between.1Hr.and.4Hr.format.display..Press.-.to.toggle.between.
Celsius.and.Fahrenheit.display.
1..Press.the.SET/WAVE button to confirm.
Setting the Alarm

To Set Alarm Time

1. Press the + or - buttons to show the alarm time. The AL.icon.will.be.
displayed.
.. Further.press.the.+.or.-.buttons.to.change.the.alarm.time..Holding.
the.+.or.–.buttons.will.make.the.setting.scroll.faster.
.. If.no.key.is.pressed.for.about.5.seconds,.the.alarm.time.setting.will.
be confirmed and the clock will jump back to normal time display
mode.
Activate Alarm Function
1.. Slide.the.SNZ/ALARM ON/OFF.switched.to.the.ON.position,.the.
sign. will appear. The alarm function is activated.
2. When the alarm sounds, press the Snooze/Light button. The alarm
will.sound.at.the.same.time.on.the.next.day.
3. To deactivate the alarm function, slide the SNZ/ALARM ON/OFF.
switched.to.the.OFF.position.
All manuals and user guides at all-guides.com
0