Technical Specifications; Maintenance And Storage - Hudora 71653 Instrucciones De Montaje Y De Uso

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral component of the
product. Therefore, please store them and the packaging carefully in case questions arise
in the future. Please always include these instructions when handing on the product to a
third party. This product must be assembled by an adult. This product is not designed for
industrial use. The use of the product requires certain capabilities and skills. Always adjust
according to the age of the user and use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: All Stars basketball stand
Item number: 71653, 71655, 71656/01
Height-adjustable: 165 – 205 cm
Purpose: Portable training rack for basketball throwing exercises.
If you have assembly problems or would like further information on the product, we have all
you need and more at http://www.hudora.de/.
CONTENTS
1 x Basketball stand | 1 x These instructions
Other parts which may be included with the delivery in some circumstances are not re-
quired.
GENERAL TRAINING PRINCIPLES
1. Warm up:
Warm up before each training session. Walking or running on the spot and light stretching
exercises are excellent for warming up.
2. Breathing:
Correct breathing plays an important role in training. Breathe calmly and evenly. Never hold
your breath while training.
3. Clothes and space:
Wear comfortable sports clothing when training. Always wear sports shoes; never train in
bare feet, sandals, socks or tights.
4. Warm down:
Use light stretching to warm down again after training. This allows the pulse to drop slowly
and allows the body to regenerate itself more quickly for the next session, as the
decomposition of metabolic wastes (lactates) is better achieved through carrying out these
movements at the end.
5. Health:
Stop the exercise program immediately if you feel a tightening in your muscles or any
general pain when carrying out the exercises. For your own safety, please contact a doctor.
USE: Make sure this piece of equipment is positioned securely and firmly. Adjust the length
of time you train to your capacities and do not over-exert yourself.
WARNING: As a matter of course, you should consult your doctor before starting the
training.
SAFETY INSTRUCTIONS
• This training equipment is NOT a toy! Use the basketball stand for its intended purpose
only.
• This piece of training equipment is only suitable for private use. If it is used commercially,
any guarantee is invalidated.
• Warnings! The stand must be properly secured at all times to prevent toppling.
• Place the basketball stand on a firm and level surface and make sure this piece of
equipment is positioned securely and firmly.
• Always fill the base with sand (or water) so that the stability of the basketball stand is
assured and it won't fall forwards. We would recommend filling the base with sand
rather than water as water will flow out if there is a hole. This could cause the product
to fall over and cause damage to objects or injury to people.
• Check that all connections have been tightly fastened before using the basketball stand
and check again later!
• Before each use, check that the basketball stand is set up correctly and never use it if
it is not working properly.
• Check the basketball stand regularly for defective parts and replace them. Use original
spare parts only.
• Do not climb up the basketball stand.
• Do not hang off the basket or make slam dunks, the basketball stand could tip over.
• Never allow children to play in the immediate proximity of this piece of training
equipment without supervision and never let them assemble it.
• Never use the basketball stand near water or leave it outside in the rain.
• Wear suitable clothing when training. The clothes must be constituted in such a way
that they cannot catch in anything during the training due to their fit.
• Always wear training shoes, and never train in bare feet, or when wearing sandals,
socks or stockings.
• Never wear jewellery which could catch in the basketball basket.
• If you start to feel unwell, discontinue training immediately.
TOOLS REQUIRED
• 8 mm hexagonal wrench
• 13 mm hexagonal wrench
• hammer (not supplied)
• Screwdriver (not supplied)
All images are examples of the design.
ASSEMBLY
Step 1:
Use a pencil to mark the lower vertical tube (7) at the conical end at a height of 6 cm. Slide
the middle vertical tube (6) with high physical strength as far as possible onto the lower
vertical tube. Make sure that the drill holes in the lower tube (7) and the outer threads of the
middle tube are aligned. The fully assembled middle tube should cover the marking so that
this is no longer visible. (Fig. 1)
Step 2:
Place the connected tubes at the intended position on the base-moulded part (8). The
middle thread at the upper end of the middle tube (6) must be aligned towards the rear.
Slide the axle (9) through the wheels (10) as well as through the drill holes in the lower
vertical tube (7) and the base-moulded part (8). (Fig. 2)
Step 3:
Connect the base-moulded part (8) and the lower vertical tube (7) with the two diagonal
struts (11 + 12). Use the screws (17) and the flat washers (22) on the base, the screw (15)
and the flat washer (23) as well as the nut (21) on the lower vertical tube. (Fig. 3)
Step 4:
Fill the base-moulded part (8) with sand (or water) and close it with the cover (13). (Fig.4)
Step 5:
Mount the net (3) on the basket ring (2). (Fig. 5)
Step 6:
Connect the basket ring (2), the board (1) and the rear connection tube (4) with each other.
You should for this purpose use the screws (14), flat washers (19) and nuts (20). (Fig. 6)
Step 7:
Loosen the grub screw (16) of the connection tube (4) and mount it together with the basket
and board on the upper vertical tube (5). You should for this purpose use the screw (18), flat
washer (23) and nut (21). Ensure that the groove (recess) in the upper tube (5) is aligned to
the rear (Fig. 7). Then firmly retighten the grub screw (16) of the connection tube.
Step 8 - Height adjustment:
Loosen the grub screw (16) of the middle tube (6) and insert the upper vertical tube (5) to
the desired height into the middle tube (6). Then firmly retighten the grub screw (16). The
height of the basket can be steplessly varied between 165 cm and 205 cm. Make sure that
the upper tube is inserted at least 17 cm into the middle tube in the fully assembled
condition. The marking line on the upper tube should thereby not longer be visible. (Fig. 8)
WARNING: The height of the basket ring must never exceed 205 cm from the ground.
WARNING: Never use the basketball stand without first having filled the base section with
water or sand.
TRANSPORTING THE STAND
Grasp the central post with both hands and fix the base with your left foot. Tilt the basketball
stand towards you until you can move it using the mounted wheels. Once you have
transported the stand to where you want it, return it carefully to an upright position.

MAINTENANCE AND STORAGE

Use a dry or damp cloth only to clean the product; do not use special cleaning agents!
Check the product for damage or traces of wear and tear before and after each use. Do not
make any structural changes. For your own safety, please use original spare parts only.
These can be sourced from HUDORA. If parts become damaged or if sharp edges or corners
should develop, the product may not be used any more. If in any doubt, please contact our
service team (http://www.hudora.de/service/). Store the product in a safe place where it is
protected from the elements, cannot be damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection point in your
area. Local waste management companies will be able to answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we put just as
much effort into rectifying them. Therefore, you can find numerous information on the pro-
duct, replacement parts, solutions to problems and lost assembly manuals at http://www.
hudora.de/.
8/12