Frigidaire DFN39 Manual De Instrucciones página 26

1 - Remove the package and protections
Two people are required to remove the
package base.
Carefully tilt the refrigerator for one side and
breaks the side of the base to remove it.
Tilt the refrigerator again
to the other side and
remove the rest of the
base.
Remove all foams and
adhesive tapes of shelves
and/or drawers.
Remove the transparent plastic film from the
control panel.
2 – Choose the installation place
Respect the minimum
distances between the
refrigerator and
walls: on top: 10cm
/ side: 10cm / back
10cm.
Do not install the refrigerator outdoors or
under the direct incidence of sunlight. Avoid
placing the refrigerator next to chemicals or
heat sources (stoves, ovens, etc.), and areas
with frequent water handling (tank, sink).
26
All manuals and user guides at all-guides.com
Installation
the
3 – Level the refrigerator
Level your appliance with door closed.
1. Start leveling the left
side of the appliance
and then level the right
side.
2. Adjust the leveling
leg until all rest firmly on
the floor.
Avoid the refrigerator be tilted to one side or
forward.
The only inclination allowed is back, to facilitate
the doors closing.
After leveling your refrigerator, turn the
stabilizer/leveling leg to touch the floor. The
function of this is to stabilize and level the
product when the door is open and loaded.
Whenever moving
necessary repeat the leveling process.
Leveling is important because it prevents
swinging movements, vibration and problems
with your refrigerator.
Do not use different leveling legs from the
original ones.
the refrigerator, it's