True Wireless; Stereo Mode - PORSCHE DESIGN 911 Manual Del Usuario

True Wireless

The True Wireless function enables you to wirelessly connect your 911 Speaker with another 911 Speaker as a second sound source in the same room. Here,
we differentiate between stereo mode, where 911 Speaker 1 emits the audio signal from the left-hand channel and 911 Speaker 2 emits the audio signal
from the right-hand channel [ as with classic stereo systems ] and party mode, where both 911 Speakers emit the same stereo signal.
When using the True Wireless function, the volume of both 911 Speakers is controlled synchronously. The devices also switch off synchronously, i. e., if you
switch one 911 Speaker off, the second 911 Speaker automatically switches itself off too. When using True Wireless mode, we recommend that the source
device is always connected with 911 Speaker 1.

Stereo mode

To activate stereo mode, proceed as follows:
1. Switch on both 911 Speakers using the Power button .
2. Select the Bluetooth input [ the LED flashes or illuminates in blue ] for 911 Speaker 1.
®
3. Simultaneously press on 911 Speaker 1's Bluetooth and volume buttons
®
'True Wireless pairing'.
4. The left-hand LED of 911 Speaker 1 will flash in blue.
5. 911 Speaker 1 will emit an acoustic signal every five seconds.
6. Select the Bluetooth input [ the LED flashes or illuminates continuously in blue ] for 911 Speaker 2.
®
7. Simultaneously press on 911 Speaker 2's Bluetooth and volume buttons
®
'True Wireless pairing'.
for a short time; you will hear the message
for a short time; you will hear the message
8. 911 Speaker 2's right-hand LED, located above the keypad, will flash in blue.
9. When the message 'Stereo mode left' is emitted from 911 Speaker 1 and the message 'Stereo mode right' emitted from 911 Speaker 2, and when the
LEDs above the keypads of both 911 Speaker 1 and 2 turn from flashing to continuously illuminated, the connection has been established.
True Wireless
Speaker 1
[ EN ] The 911 Speaker
Speaker 2
14 | 15