Operation - EGO CH3200 Manual Del Operador

OPERATION

HOW TO CHARGE THE BATTERY PACK
WARNING:
conditions. Water entering the charger will increase the risk of electric shock.
NOTICE:
Lithium-Ion battery packs are shipped partially charged. Before using it the
first time, fully charge the battery pack.
1. Connect the charger to the power supply
(120V~, 60Hz). The LED Indicator 1 will
briefly shine green and the LED Indicator
2 will briefly shine red at the same time,
indicating that the charger is working
correctly.
2. Align the raised ribs of the battery pack
with the mounting slots in the charger
and slide the battery pack down onto the
charger (Fig. 2).
3. The charger will communicate with the battery pack to evaluate the condition of
the battery pack.
4. When the battery pack is charging, the LED Indicator 1 on the charger will flash
green. For BA1400, BA1400-FC, BA2800, BA2800-FC, BA4200 and BA4200-FC
battery packs: the power indicator on the battery will flash in sequence: red,
orange and green. For BA1400T, BA1400T-FC, BA2240T, BA2240T-FC, BA2242T,
BA2242T-FC, BA2800T, BA2800T-FC, BA4200T, BA4200T-FC, BA5600T, BA5600T-
FC, BA6720T and BA6720T-FC battery packs, the last LED indicator on the battery
will keep flashing green while the former LEDs shine solid green.
5. When the battery pack is 80% charged, the LED Indicator 1 will stop flashing and
will shine green continuously. The LED Indicator 2 start flashing green.
14
56V CHARGER — CH3200/CH3200-FC
Do not use the charger outdoors or expose it to wet or damp
2
LED Indicator 1
LED Indicator 1