Vivanco WLAN ROUT 54-N Instrucciones De Uso página 22

23414
Configuration
Encryption
Use 802.1x Authentication
WPA Authentication Mode
WPA Cipher Suite
WPA2 Cipher Suite
Pre-Shared key Format
Pre-shared Key
Enable Pre-Authentication
Authentication RADIUS Sever If you use RADIUS Sever to ensure your
Click <Apply Change> at the bottom of the screen to save the above configurations. You
can now configure other advance sections or start using the router.
All manuals and user guides at all-guides.com
To enable WEP, WPA, WPA2 and WPA2
Mixed encryption modes, select the option in
the drop list. If you select none, any data will
be transmitted without Encryption and any
station can access the router.
To enable the 802.1x, Click the check box of
the item.
There
(WPA-Radius)" and "Personal (Pre-Shared
Key)". You can select the mode by clicking
the item.
Select the WPA Cipher Suite to be TKIP or
AES
Select the WPA2 Cipher Suite to be TKIP or
AES
To decide the format, select what you need in
the drop list.
Enter the Pre-shared Key according to the
pre-shared key format you select.
You can mark this checkbox to enable
Pre-authentication after selecting Enterprise
(RADIUS) WPA 2 authentication mode
security, you have to set up the parameters in
the item. To set up the Port, IP address and
Password of your RADIUS, Enter the Port
Number, IP and Password.
22
WLAN ROUT 54-N
are two items, "Enterprise