Vivanco WLAN ROUT 54-N Instrucciones De Uso página 29

23414
Common configurations for WAN interface
There are some settings are able to be configured on each WAN access types:
Enable Web Server Access on
WAN from port
Enable IPsec pass through on
VPN connection
Enable PPTP pass through on
VPN connection
Enable L2TP pass through on
VPN connection
Clone MAC Address
All manuals and user guides at all-guides.com
To Enable the user to access this Router through
Internet, Enter the specific IP and the port number
Mark the check box to enable IPsec pass through
on VPN connection and clear the checkbox to
disable.
Mark the check box to enable PPTP pass through
on VPN connection and clear the checkbox to
disable.
Mark the check box to enable L2TP pass through on
VPN connection and clear the checkbox to disable.
When ISP use MAC address authentication (with
DHCP), then the MAC address of the Ethernet card
attached to your Cable modem must be registered
with the ISP before connecting to the WAN
(Internet). If the Ethernet card is changed, the new
MAC address must be registered with the ISP.
MAC cloning feature allows t
reported by WAN side network interface card to be
set to the MAC address already registered with the
ISP eliminating the need to register the new MAC
address with the ISP. This feature does not change
the actual MAC address on the NIC, but instead
changes the MAC address reported by Wireless
Router to client requests. To Change the MAC
address, enter it in the text box.
29
WLAN ROUT 54-N
he MAC address