Vivanco WLAN ROUT 54-N Instrucciones De Uso página 7

23414
Desktop Option
1. The Router has one plastic stand that can be divided into two parts.
2. Combine one part of stand with the side of router.
3. Do the same with the second part.
4. Place the Router
Wall-mount option
Before attach this router on the wall, you have to finish the desktop option steps first.
1. Select a location with access for cables and a power outlet.
2. Unplug the unit. Place it upside down on a
anchors.
3. Installing the Wall mount anchor (p
mer.
4. Insert the provided screws in each hole of the stand parts.
5. Attaches the unit to the anchors on the wall.
S tand Option
1. The Router includes two
2. Combine two parts into one stand. Combine it with the side of router near the power
port. Push the stand up to snap it into place.
3. Place the Router.
Res tore Default Button
1. Push the button for more than 5 seconds and then release it, the system will return to
factory default setting. In the meantime, system rewrites flash to default value and Status
LED halts for a while. Approximately 60 seconds later, the Status LED blinks green pe-
riodically, now th
process has been interrupted by any reason (power off...), the system will fail. Before
performing the process, ensure a safe operating environment please.
2. To reboot the Router, Press the button for 2-5 seconds and then release it, and all the
setting won't be erased. Wait for the Router to complete the reboot, and then you can
start to use it.
All manuals and user guides at all-guides.com
lastic) into the wall with tools such as drill or ham-
stand parts.
e whole system parameters have returned to factory default value. If the
7
WLAN ROUT 54-N
flat surface and mark the two holes for