Tcp/Ip Setting; Lan Interface Setup - Vivanco WLAN ROUT 54-N Instrucciones De Uso

23414

TCP/IP Setting

LAN Interface Setup

To set up the configuration of LAN interface, Private IP of you router LAN Port and
Subnet mask for your LAN segment.
Configuration
IP address
Subnet Mask
DHCP Server
DHCP Client Range
802.1d Spanning tree
Enable UPnP
All manuals and user guides at all-guides.com
The IP of your Router LAN port (Default
192.168.1.1)
Subnet Mask of you LAN (Default
255.255.255.0)
To give your LAN Client an IP, you have to
enable "DHCP Server". If not, manual setting
up your client IP is necessary when you want
to use the router as your client's default
gateway.
Specify the DHCP Client IP address range.
You can also click the "Show Client" button to
listed those connected DHCP clients.
To prevent from network loops and preserve
the quality of bridged network
Mark this checkbox to allow this router to be
recognized by UPnP.
25
WLAN ROUT 54-N