Vivanco WLAN ROUT 54-N Instrucciones De Uso página 27

23414
PPPoE Mode
User Name , password and
service name
Connection Type
Idle Time:
MTU Size
Attain DNS automatically:
Set DNS Manually
All manuals and user guides at all-guides.com
Fill in the
provided by your ISP.
"Continu
"Connect on demand" is for bill by connection time. Y
can set up the Idle time for the value specifies the numbe
of time that elapses before the system automatically
disconnects the PPPoE session.
"M anual" To connect to ISP, click "Connect" manual
from the WEB user interface. The WAN connection will
not disconnected due to the idle timeout. If the WAN
breaks down and latter links a
auto-connect to the ISP.
The value specifies the number of idle time that elapses
before the system automatically disconnects the PPPoE
session.
To Enable the Maximum Transmission Unit of Router
setup. Any packet over this number will be chopped up
into suitable size before sending. Larger number will
enhance the transmission performance.
Enter your MTU number in the text-box to set the
limitation.
If your DNS provide by ISP is dynamic, choose
"Attain DNS automatically
To specify the DNS, and enter the DNS provided by your
ISP in DNS 1 2 3.
27
WLAN ROUT 54-N
User Name, password and service name
ous" is for Always keep connection
gain, the router will not
that
ou
r
ly
line