Time Zone Setting; Syste M Log - Vivanco WLAN ROUT 54-N Instrucciones De Uso

23414

Time Zone Setting

This page allows users to configure the time of the router. To specify manually, fill in the
blanks in "Current Time" and click the "Apply Change" button. To synchronize time from a
timeserver, please mark the "Enable NTP client update" checkbox, select a NTP server
from the drop list or manually enter a NTP server. Click the "Apply Change" button after
your configuration.
Syste m Log
This System Log page shows the information of the current activities on the router.
To enable system log function:
1. Mark the "Enable Log" c
2. To see all information of the system, select the "system all" checkbox.
To see wireless
To sent the log information to a certain note, select the "Enable Remote Log" checkbox
and fill in the IP address in the "Log Server IP Address" box.
3. Click the "Apply Changes" button to activate
You could also click the "Refresh" button to refresh the log information or click the "clear"
button to clean the log table.
All manuals and user guides at all-guides.com
heckbox.
information
39
WLAN ROUT 54-N
only, select the "wireless" checkbox.