Vivanco WLAN ROUT 54-N Instrucciones De Uso página 31

23414
IP filtering
The Wireless Router could filter the outgoing packets for security or management
consideration. You can set up the filter against the IP addresses to block specific
internal users from accessing the Internet.
Configuration
STEPS 1.
2.
3.
Click <Apply Change> at the bottom of the screen to save the above configurations.
You can now configure other advance sections or start using the router.
All manuals and user guides at all-guides.com
Click the check box of "Enable IP Filtering" to enable the function.
Enter the specific Local IP address (EX 10.10.3.9), Protocol
(UDP/TCP), and comment (EX. Peter)
To Delete the IP address on the list, Click the check box in the select
item and click the "Delete Selected". If you want to delete all entries on
the list, click "Delete All" to remove all of them.
31
WLAN ROUT 54-N