Sony HT-CT260 Manual De Instrucciones página 41

Sound Bar (SA-CT260)
Amplifier section
U.S. models:
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(FTC)
Front L + Front R:
With 3 ohms loads, both channels driven,
from 200 - 20,000 Hz; rated 25 Watts per
channel minimum RMS power, with no
more than 1 % total harmonic distortion
from 250 milliwatts to rated output.
POWER OUTPUT (reference)
Front L/Front R: 85 W
(per channel at 3 ohms, 1 kHz)
Canadian models:
POWER OUTPUT (rated)
Front L + Front R: 35 W + 35 W
(at 3 ohms, 1 kHz, 1 % THD)
POWER OUTPUT (reference)
Front L/Front R: 85 W (per channel at
3 ohms, 1 kHz)
Inputs
ANALOG
OPTICAL
COAXIAL
Bluetooth section
Communication system
Bluetooth Specification version 2.1 +
EDR (Enhanced Data Rate)
Output
Bluetooth Specification Power Class 2
Maximum communication range
Line of sight approx. 10 m
Frequency band
2.4 GHz band (2.4000 GHz - 2.4835
GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible Bluetooth profiles
A2DP (Advanced Audio Distribution
Profile)
AVRCP 1.3 (Audio Video Remote
Control Profile)
3)
Supported Codecs
4)
SBC
Transmission range (A2DP)
1) The actual range will vary depending on
2) Bluetooth standard profiles indicate the
3) Codec: Audio signal compression and
4) Subband Codec
Front speaker unit
Speaker system
Speaker unit
Rated impedance
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
1)
Subwoofer (SA-WCT260)
POWER OUTPUT (reference)
Speaker system
2)
Speaker unit
Rated impedance
Power requirements
20 Hz - 20,000 Hz (Sampling frequency
44.1 kHz)
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, cordless phone, reception
sensitivity, operating system, software
application, etc.
purpose of Bluetooth communication
between devices.
conversion format
Full range speaker system, Bass Reflex
55 mm × 80 mm (2 1/4 in × 3 1/4 in),
cone type
3 ohms
120 V AC, 60 Hz
On: 32 W
Standby mode: 0.3 W or less
Bluetooth Standby mode: 3 W or less
940 mm × 102 mm × 89 mm (37 1/8 in ×
4 1/8 in × 3 5/8 in) (with stands)
940 mm × 89 mm × 97 mm (37 1/8 in ×
3 5/8 in × 3 7/8 in) (without stands)
2.8 kg (6 lb 2 3/4 oz)
130 W (per channel at 4 ohms, 100 Hz)
Subwoofer, Bass reflex
130 mm (5 1/8 in) cone type
4 ohms
120 V AC, 60 Hz
continued
41
US