Changing The Display Settings - Sony XVM-R90D Manual De Instrucciones

Notes
• When the output level is set to "High" in step 2,
noise may be heard.
• If noise is heard due to the interference with the
local FM broadcast, change the FM transmission
frequency.
• When the FM modulator is turned off, you
cannot change the frequency setting.

Changing the display settings

You can adjust the display settings manually if
the display is hard to see from the position
where you are seated.
1
Press (MENU) repeatedly to select the
desired item.
2
Press (VOL) (+) or (VOL) (–) to adjust to
the desired setting.
When "Picture" is selected;
The setting value of the item
selected appears in this area.
Picture
+
/–
Press or MENU.
Press (VOL) (+) : to increase the contrast.
Press (VOL) (–) : to decrease the contrast.
When "Brightness" is selected;
Brightness
+
/–
Press or MENU.
Press (VOL) (+) : to brighten the contrast.
Press (VOL) (–) : to darken the picture.
32
32
When "Color" is selected;
Color
+
/–
Press or MENU.
Press (VOL) (+) : to increase colour intensity.
Press (VOL) (–) : to decrease colour intensity.
When "Hue"* 1 is selected;
Hue
+
/–
Press or MENU.
Press (VOL) (+) : to increase the saturation.
Press (VOL) (–) : to decrease the saturation.
1 "Hue" is adjustable only when the NTSC
*
colour system is selected.
2 "CTR" appears only when
*
centre of the bar.
When "Dimmer" is selected;
Press (VOL) (+) or (VOL) (–) to select "On."
The brightness of the screen will be
adjusted automatically.
Dimmer; On
+
/–
Press or MENU.
When "Video Adjust" is selected;
Press (VOL) (+) or (VOL) (–) to select
"Reset."
"Picture," "Brightness," "Color,"
"Hue," and "Dimmer" settings will be
reset to the factory preset level.
Video Adjust;
Reset
+
/–
Press or MENU.
continue to next page t
32
CTR 2
*
is in the
15