System Settings - Pioneer MVH-X385BT Manual De Instrucciones

Menu Item
SLA
[+4] to [–4]
*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings
(page 6).
*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings
(page 6).
*3 Not available when [OFF] is selected in [SUB.W].

SYSTEM settings

You can also access to these menus when the unit is turned off.
Menu Item
LANGUAGE (Not available for MVH-285BT)
[ENG](English), [ESP](Spanish) Select the language to display the text
CLOCK SET
12H/24H
[12H], [24H]
AUTO PI
[ON], [OFF]
AUX
[ON], [OFF]
Description
Adjust the volume level for each source
except FM.
Each of the below combinations are set to
the same setting automatically.
• USB, iPod, ANDROID, and APP (iPhone)
• BT AUDIO, ANDROID, and APP (Android)
Description
information from a compressed audio file.
Set the clock (page 5).
Select the time notation.
Search for a different station with the same
programming, even if using a preset
station.
Set to [ON] when using an auxiliary device
connected to the unit.
Menu Item
USB AUTO
[ON], [OFF]
BT AUDIO
[ON], [OFF]
APP (Only for MVH-285BT)
[ON], [OFF]
BT MEM CLEAR
[YES], [CANCEL]
BT VERSION
APP CONN.SET (Only for MVH-X385BT)
[WIRED], [BLUETOOTH]
ANDROID WIRED (Only for MVH-X385BT/X185UI)
[MEMORY], [APP CONTROL]
P.APP AUTO ON (Only for MVH-X385BT/X185UI)
[ON], [OFF]
Description
Select [ON] to automatically switch to
[USB] source when a USB device/iPod is
connected to the unit.
Select [OFF] when a USB device/iPod is
being connected to the unit just for
charging.
Set the Bluetooth signal on/off.
Set the Bluetooth APP mode on/off.
Clear the Bluetooth device data (device list,
PIN code, call history, phone book, preset
phone numbers) stored in the unit.
[CLEARED] appears when data is
successfully deleted.
Displays the system version of the unit and
the Bluetooth module.
Select the appropriate connection method
according to your device.
Select the appropriate connection method
for an Android device.
Select [ON] to automatically launch the car
remote application when an Android device
is connected to the unit via AOA. (Not
available when [MEMORY] is selected in
[ANDROID WIRED].)
17
En