Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Insert core adapters into carpet tape roll (purchased
separately); slide carpet tape axle through core
adapters, and place onto pins at upper end of end
brackets. (See Figures 1-2)
NOTE: Do not throw away the core adapters
after use. Keep to reuse.
Figure 1
Core
Adapter
Figure 2
Pin
2. Pull 18 inches of tape from top of roll.
(See Figure 3)
Figure 3
18"
PAGE 2 OF 6
LOADING TAPE ROLL
Carpet Tape Roll
Core
Adapter
Carpet
Tape Axle
Pin
3. Apply adhesive side of tape to carpet directly in front
of roller. Ensure adhesive side of tape is facing away
from roller. (See Figure 4)
Figure 4
Adhesive Side
To Carpet
4. Continue applying tape by pushing tape applicator
forward over desired coverage area. (See Figure 5)
Figure 5
1-800-295-5510
uline.com
0221 IH-2187
Publicidad
