Short / Speed Code Dialling; Telephone Book; Programming - FHF FernTel3 Instrucciones De Manejo

- Restrictions
-

Programming

- SW version
Press the key to select a menu item.

Telephone book

In the telephone book, you press the
numbers). Press the
- dial
- modify
- add
- delete
- delete all
In case of an empty telephone book, only the sub-menu „add" appears.
For using the menus „add", „modify", „delete", „delete all", you are also required to enter the
PIN.
How it works
dial
The number stored with the displayed name is dialled.
add
A new telephone book entry is added to the telephone book.
modify
Names and number of the displayed telephone book entry is modified.
delete
The displayed telephone book entry is deleted.
delete all
All entries of the telephone book are deleted.

Short / Speed code dialling

Under Short / Speed code dialling you can decide if you want to use the
code dialling ( key alone) or for Short code dialling (
key (0...9, +, #)).
The first sub menu shows if Speed code dialling or Short code dialling has been set.
Having pressed the
dialling memory, or a maximum of 12 telephone numbers in the Short code dialling memory.
The second sub menu „Mode
code dialling and the other way round.
14
key to choose between the following sub-menus:
key you may then program a telephone number in the Speed code
key" enables switching from Speed code dialling to Short
and keys to display the entered names (and
key in combination with a further
key for Speed