Adjust the ringing melody
-
Lift the handset.
-
Press the * key.
-
Press key 6 (the set melody is played back)
-
Set the desired melody using the keys 1 to 9.
-
Press the # key to store the selected melody.
-
Replace the handset.
Set dialling mode
-
Lift the handset.
-
Press the * key.
-
Press key 9.
-
Enter the code for the desired dialling mode.
-
Press the # key to store the selected dialling mode.
-
Replace the handset.
Code / Key
Dialling mode
1
Dual-tone multifrequency (DTMF),
unlimited tone duration
2
Dual-tone multifrequency (DTMF),
tone duration 90 ms
3
Pulse dialling (PD), 1.5:1
4
Pulse dialling (PD), 2:1
Restore to as-delivered condition
-
Lift the handset.
-
Press the * key.
-
Press key 3.
-
Press the # key to reset the as-delivered condition.
-
Replace the handset.
Signalling tones during programming
Tone
Acknowledgement tone
Error tone
(1...9)
(1, 2, 3, 4)
Number
1 long tone
4 short tones
Comment
The DTMF tone is being generated as
long as the associated key is being
pressed.
As-delivered condition
Significance
Completion of a correctly performed
procedure.
An error occurred within a procedure. The
procedure is cancelled.
23