Technical Data - Omron E3 Intense Manual De Instrucciones

Technical data

Product Category
Product Description
Model (code)
Power Source
Battery Life
Frequency
PULSE Duration
Maximum Output Voltage
Power Control
Operating Temperature and Humidity
Storage and Transportation
Temperature, Humidity, Air Pressure
Weight
Outer Dimensions
Package Contents
This OMRON product is produced under the strict quality system of OMRON HEALTHCARE Co.
Ltd., Japan.
Designed for a minimum of 5 years life expectancy.
= Type BF applied part
Protection against ingress of an object of 12.5 mm or more.
Protection against the ingress of vertically falling water drips with the device tilted at
15 degrees.
This product should not be used by persons with medical implants, e.g. heart
(Medical Device Directive).
NOTE:
All manuals and user guides at all-guides.com
Electroanalgesic Transcutaneous Stimulator
Pain Reliever
E3 Intense (HV-F021-EW)
E3 Intense (HV-F021-ESL)
DC3 V
(2 AAA alkaline batteries or 2 AAA manganese batteries)
New batteries (2 AAA alkaline batteries) will last for
approx. 4 months (when used for 15 minutes a day,
Lower Back Mode, max. intensity).
Approx. 1 to 238 Hz
15 intensity levels
+10 to +40 °C / 30 to 80 % RH
-20 to +60 °C / 10 to 95 % RH / 700 to 1060 hPa
Approx. 100 g (incl. batteries)
52 (W) × 112 (H) × 25 (D) mm
Main unit, Electrode cord, Pad holder, Long Life Pads,
Batteries for trial use, Belt clip, Soft pouch, Instruction manual
Internally powered (Protection against electric shock)
Type BF (Applied part)
IP22 (Ingress Protection)
Read the instruction manual carefully
21
EN