Manufacturer's Warranty - Hilti SL 2-22 Manual De Instrucciones Original

Ocultar thumbs Ver también para SL 2-22:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
Storage
WARNING
Accidental damage caused by defective or leaking batteries !
▶ Always store your products with the batteries removed!
▶ Store the product and the batteries in a cool and dry place. Comply with
the temperature limits stated in the technical data.
▶ Do not store batteries on the charger. Always remove the battery from
the charger when the charging operation has completed.
▶ Never leave batteries in direct sunlight, on sources of heat, or behind
glass.
▶ Store the product and batteries where they cannot be accessed by
children or unauthorized persons.
▶ Prior to each use and before and after prolonged storage, check the
product and the batteries for damage.
8
Troubleshooting
If a problem occurs, always observe the charge-status and fault indicator of
the battery. See the section headed Status indicators of the Li­ion battery.
If the trouble you are experiencing is not listed in this table or you are unable
to rectify the problem by yourself, contact Hilti Service.
Trouble or fault
The battery doesn't
engage with an audi-
ble click.
LEDs of the battery
show nothing
9

Manufacturer's warranty

▶ Please contact your local Hilti representative if you have questions about
the warranty conditions.
*2265888*
Possible cause
The retaining lugs on the
battery are dirty.
Battery defective
2265888
Action to be taken
▶ Clean the retaining
lugs and push the
battery in until it
engages.
▶ Contact Hilti Service.
English
11

Publicidad

Tabla de contenido
loading

Tabla de contenido