Kohler K-817 Diagrama De Instalación página 2

4"
(10.1 cm)
10-1/8"
(25.8 cm)
1-3/16"
(3 cm)
Product Information
Applicable product:
Drop-in bath
Fixture*:
Bathing well:
Basin area, top 62-1/2" (158.8 cm) x 24-3/4" (62.9 cm)
Basin area, 49" (124.5 cm) x 22" (55.9 cm)
bottom
Weight 365 lbs (165.5 kg)
To overflow:
Water depth 15-1/4" (38.7 cm)
Capacity 75 gal (284 L)
* Approximate measurements for comparison only.
Drop-in cut-out dimensions:
Required accessories:
Clearflo slotted overflow brass bath drain K-7271
Clearflo slotted overflow bath drain –
PVC pipe
Optional accessories:
Undermount kit
1135402-1-A
66-15/16" (170 cm)
33-1/2" (85.1 cm)
K-817
66-1/2" (168.9 cm) x 31"
(78.7 cm)
K-7272
K-136
No change in measurements if connected
with drain illustrated. (K-7272)
14-1/2"
(36.8 cm)
31-1/2"
(80 cm)
7"
(17.8 cm)
2-5/8" (6.7 cm)
19-1/16"
(48.4 cm)
17-3/8"
(44.2 cm)
22-3/16" (56.4 cm)
Notes
Install this product according to the installation guide.
Floor support under bath must provide for a minimum of 78
lbs/square foot (386 kg/square meter) loading.
Cast iron baths are extremely heavy, making some drop-in
installations difficult. Split the deck/surround if installing into a
deck.
To clear the overflow side bath rim, a minimum 7" (17.8 cm) bath
spout is recommended.
To clear the end wall bath rim, a minimum 10" (25.4 cm) bath
spout is recommended.
Water flow from angled bath spouts less than 10" (25.4 cm) or 7"
(17.8 cm) may also provide needed clearance.
Fixture conforms to ASME Standard A112.19.1/CSA B45.2. All
dimensions are nominal.
2
2-1/2" (6.4 cm)
1-1/2" OD
Kohler Co.