Switch Tracks; Use Bluetooth Devices; Connect A Device - Philips CE235BT Manual De Usuario

Ocultar thumbs Ver también para CE235BT:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 129

Switch tracks

During play, you can switch tracks or folders
quickly.
Switch tracks directly
1
Press
to access the track list.
» The file name of current track scrolls.
2
Rotate
to toggle through tracks.
3
Press
to play the selected track.
Switch folders for a track
1
Press
to access the folder list.
» The name of current folder scrolls.
2
Rotate
to toggle through folders.
3
Press
to select the folder.
» The system starts playing the first track
under the folder.
EN
16
7 Use Bluetooth
devices
With this car audio system, you can listen to
audio from a player or make a call through
Bluetooth.

Connect a device

Note
Philips does not guarantee the
compatibility with all Bluetooth devices.
Before pairing a device with this system, read its user
manual for Bluetooth compatibility.
Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
At one time, you can connect only one Bluetooth
device to this system.
The operational range between this system and a
Bluetooth device is approximately 3 meters (9 feet).
Any obstacle between this system and a Bluetooth
device can reduce the operational range.
Keep away from any other electronic device that may
cause interference.
On your device, follow the steps below.
1
Search for Bluetooth devices.
2
In the device list, select CE235BT.
» If the pairing succeeds, [PAIRED] is
displayed on the LCD screen of this
system.
» If the connection succeeds,
[CONNECTED] scrolls and
displayed on the LCD screen of this
system.
» If the connection fails, [FAILED] is
displayed on the LCD screen of this
system.
If a password is required, enter 0000,
and then confirm the password
entry. For some devices, you need to
enable or permit the connection with
CE235BT after successful pairing.
is

Publicidad

Tabla de contenido
loading

Tabla de contenido