Play Audio From A Bluetooth Device; Make A Call - Philips CE235BT Manual De Usuario

Disconnect a device
1
Press and hold to access the system
menu.
2
Press / repeatedly until [DIS--CON]
is displayed.
3
Press .
» [WAIT] is displayed with -, --,
and --- blinking alternately until
[DISCONNECTED] scrolls.
Tip
•
You can also complete the disconnection on your
device.
Reconnect a device
Some Bluetooth devices support the automatic
reconnection with a paired Bluetooth device.
If your device does not support automatic
reconnection, reconnect it with this system
manually.
1
Press and hold to access the system
menu.
2
Press / repeatedly until [RE-CON] is
displayed.
3
Press .
» [WAIT] is displayed with -, --,
and --- blinking alternately until
[CONNECTED] scrolls or [FAILED]
appears.
» If [CONNECTED] scrolls, this system
is reconnected to the last connected
device.
Tip
•
You can also complete the reconnection on your
device.
Play audio from a Bluetooth
device
If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to tracks that are stored on the
device through the system. If the device also
supports Audio Video Remote Control Profile
(AVRCP) profile, you can control play on the
system.
1
Play a track on the connected device.
2
Press SOURCE repeatedly to switch the
source to [BT AUDIO].
» Play starts automatically.
• To pause or resume play, press
• To skip to the previous or next track,
press / .
Note
•
If the connected device does not support the AVRCP
profile, control play on the connected device.

Make a call

Note
•
Keep the Bluetooth connection active between the
system and your mobile phone.
Call a number
On your mobile phone, call a number.
» [CALLING] is displayed.
Redial the last called number
1
When it is not in a call, press .
» [REDIAL] is displayed.
2
Press to start calling.
.
EN
17