14 Troubleshooting; General - Philips CE235BT Manual De Usuario

Ocultar thumbs Ver también para CE235BT:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 129
Bluetooth
Output
Class 2
power
Frequency
2.4000 GHz - 2.4835 GHz ISM
band
Band
Range
3 meters (free space)
Standard
Bluetooth 2.0 specification
Tip
Backup memory for power disconnection
(CE235BT/05 only)
EN
22

14 Troubleshooting

Warning
Never remove the casing of this product.
To keep the warranty valid, never try to repair
the product yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact the
Consumer Care, make sure that the product
is nearby and the model number and serial
number are available.

General

No power or no sound
The power supply from car battery is cut
off, or the car battery runs out of energy.
Power the system with car battery.
Car engine is not on. Turn the car engine
on.
Cable is not correctly connected. Check
connections.
The fuse is burnt. Replace the fuse.
Volume is too low. Adjust volume.
If the above solutions cannot help, press
the RESET button.
Make sure that the current track is in a
compatible format.
Noise during broadcast
Signals are too weak. Select other stations
with stronger signals.
Check the connection of the car antenna.
Change the broadcast setting from stereo
to mono.
Preset stations are erased.
Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.

Publicidad

Tabla de contenido
loading

Tabla de contenido