Parts And Components; Before Use; Operation - cecotec TOTALPURE 5000 MAX OZONE Manual De Instrucciones

ENGLISH

1. PARTS AND COMPONENTS

Fig. 1
1. Panel
2. Rotative part
3. Activated carbon filter
4. High-efficiency filter
5. Primary filter
6. Front cover
Control panel
Fig. 2.
Remote control
Fig. 3.

2. BEFORE USE

Take the product out of the box.
Remove all packaging material. Keep the original box.
Make sure all parts and components are included and in good conditions. If any visible signs of
damage are observed, contact Cecotec's Technical Support Service immediately.

3. OPERATION

Ozone is a broad-spectrum fungicide, which has a strong killing effect on all kinds of bacteria
and viruses. It can improve air quality an eliminate unpleasant smells too.
Place the ozone generator in a well-ventilated room. Make sure it is placed on a stable, dry
surface.
Respect the safety distances stated on the safety instructions when installing the device in
the room.
In order to achieve the best ozone disinfection effect, close the doors and windows. There
should be no person or animal inside the room during disinfection.
Note: A slight buzzing sound may be heard when the negative ion function is activated. This is
caused by the negative iron generator and does not mean malfunction.
Plug the device into a power supply.
Press the on/off button (1) on the remote control to turn the device on. The product will operate
at medium speed level by default every time it is turned on. Press the On/off button to turn the
device off.
Operating modes
TOTALPURE 5000 MAX OZONE 23