Cleaning And Maintenance; Technical Specifications - cecotec TOTALPURE 5000 MAX OZONE Manual De Instrucciones

ENGLISH
Choose between its 3 different modes:
Eco: The device will run at low speed level (2).
Medium: The device will run at medium speed level (3).
Turbo: The device will run at maximum speed level. This mode is recommended when indoor
pollution is high (4).
Timer settings (5)
There are 3 time options: 2, 4 and 8 hrs. Press tue timer button once to select 2 hours, press it
again to select 4 hours and press it for a third time to select 8 hours.
Ozone function (6)
Press the Ozone button to activate this function. Ozone will be released for 20 minutes and
then the device will turn off for 40 minutes. This cycle will be repeated.
Press again to deactivate this function.
Applications:
Bathroom deodorisation
Daily disinfection of pet house and areas
Room disinfection
Air purification in public spaces
Wardrobe clothing sterilisation
Furniture deodorisation

4. CLEANING AND MAINTENANCE

Clean the upper part of the device with a soft damp cloth.
Do not wet or allow water to come inside the device.
Do not use chemical or harsh abrasive cleaning agents.
Switch off the device before start cleaning it. Make sure it is completely dry before using it
again.
Use a soft brush to remove dust accumulated in the air inlet and outlet. Store the device in a
safe, fry place when not used for a long time.

5. TECHNICAL SPECIFICATIONS

05629 TotalPure 5000 Max Ozone
Ozone production: 20 mg/hour
50 W, 220 V~, 50 Hz
Range of variability (production deviation): 400 mg/hour +/- 10%
24 TOTALPURE 5000 MAX OZONE