Delay Time - Denon AVR-2105 Instrucciones De Operación

DSP surround simulation
• To operate the surround mode and surround parameters from the remote control unit.
1 Select the surround mode for the input channel.
(Remote control unit)
The surround mode switches in the following
order each time the DSP SIMULATION button is
pressed:
MONO MOVIE ROCK ARENA
MATRIX
VIDEO GAME JAZZ CLUB
2
To enter the surround parameter setting mode,
press the SURROUND PARAMETER button.
• The surround parameter switches in the
following order each time the SURROUND
(Remote control unit) PARAMETER button is pressed for the different
surround modes.
3
Select the various parameters.
(Remote control unit)
4
Adjust the parameter settings.
(Remote control unit)
5
Press the ENTER button to finish surround parameter mode.
(Remote control unit)
NOTE:
• When making parameter settings, the display will return to the regular condition several seconds after the
last button was pressed and the setting will be completed.
• Operating the surround mode and surround parameters from the main unit's panel.
1
Turn the SELECT knob to select the surround
mode.
1
• When turned clockwise
• When turned counterclockwise
3
2, 3
5
4 4
3
2
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTE:
• When making parameter settings, the display will return to the regular condition several seconds after the
last button was pressed and the setting will be completed.
Surround parameters e
ROOM SIZE:
This sets the size of the sound field.
There are five settings: "small", "med.s" (medium-small), "medium", "med.l" (medium-large) and "large".
"small" recreates a small sound field, "large" a large sound field.
EFFECT LEVEL:
This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15.

DELAY TIME:

In the matrix mode only, the delay time can be set within the range of 0 to 110 ms.
SELECT
(Main unit)
DIRECT STEREO DOLBY PRO LOGIC II x DTS NEO:6
VIRTUAL SURROUND MATRIX VIDEO GAME
DIRECT STEREO DOLBY PRO LOGIC II x DTS NEO:6
VIRTUAL SURROUND MATRIX VIDEO GAME
To select the surround mode while adjusting the surround parameters, tone
SURROUND
MODE
defeat or tone control, press the SURROUND MODE button then operate the
selector.
(Main unit)
Press the SURROUND PARAMETER button.
SURROUND
PARAMETER
Press and hold in the surround parameter button to select the parameter you
want to set.
• The parameters which can be set differ for the different surround modes.
(Main unit)
(Refer to "Surround Modes and Parameters" on page 32.
ENGLISH
1 2 1, 3
5CH/7CH STEREO MONO MOVIE
JAZZ CLUB ROCK ARENA
5CH/7CH STEREO MONO MOVIE
JAZZ CLUB ROCK ARENA
31