Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
I_e]_,_]
•
Use the tone control setting to adjust the bass and treble as desired
• To operate the tone control from the remote control unit
• The tone control setting only affects
the bent speakers
•
if the tone control function is used, the main volume cannot be adiusted
up to I8 dB (The maximum
main
voJume leveJ differs in the different
surround modes)
%
IRemote
control
umt)
Display
the
surround
parameter
screen
on the
monitoE
The
screen
for the
selected
surround
mode
appears¸
"TONE"
cannot
be selected
in the
Direct
mode¸
ROCK
ARENA
EFFECT410_
TONE4
ROCK
ARENA
ROOM
SIZE
4mRdium_
EFFECT410_
2
Select "TONE"
(£emote
control
unit}
_
Switch to the Tone Control
Tone Coot
rol
/
Select Tone Defeat
"OFF"
ErTo.• O•fnt
[_:_
Bass
I +8d$
Trabll
4 +4di
(£emote controlunit}
To select Bass or Treble
To settheIevel
®
(Remote
centre
unit)
(£emote
co_ltrol
unit}
(_
Enter the setting
The surround
menu screen reappears
(Remote
contro
unit)
I
TO end the setting mode, press the surround
parameter
button again
%
(Remote
contro
unit)
• To operate the tone control from the main unit
The tone
switches
as follows
each time
the
_=_1
TONE CONTROL button
is pressed_
ZO
i_:::o
_Q
BASS H
TREBLE
(Main nit)
2
1
_,_
With the name of the volume to be adiusted selected, turn the SELECT knob to adjust
,,_0_.
the level
• TO increase the bass or treble:
Turn the control clockwise
(The bass or treble sound can be increased to up to +10 dB in
(Mainnit)
steps of 2 dB)
• To decrease the bass or treble:
Turn the control clockwise
(The bass or treble sound can be decreased up to -10 dB in
steps of 2 dB)
Surround
parameters
_3)
MODE: (DTS NEO:6)
•
Cinema
This
mode
is optimum
for playing
movies
Decoding
is performed
with
emphasis
on separation
performance
to achieve the same atmosphere
with 2-channel sources as with 6 1-channel sources
This mode is effective
for playing sources recorded
in conventional
surround
formats as well, because the
in-phase component
is assigned mainly to the center
channel (C) and the reversed phase component
to
the surround
(SL, SR and SB channels)
•
Music
This mode is suited mainly for playing mumc
The front channel (FL and FR) signals bypass the decoder
and are played dkectly
so there is no loss of sound quality, and the effect
of the surround
signals output
from the center {C} and surround
(SL, SR and SB) channels add a natural sense of expansion to the sound
field
ROOM
SIZE:
This sets the size of the sound field
There are five settings:
"small",
"reed s" (medium-smafl},
"medium",
"med I" (medium-large)
and "large"
"small"
recreates a small sound field, "large"
a large sound field
EFFECT LEVEL:
This sets the strength
of the surround effect
The level can be set in 15 steps from 1 to 15 Lower the level if the sound seems distorted
DELAY TIME:
In the matdx mode only, the delay time can be set within the range of 0 to 3OO ms
TONE CONTROL:
This can be set individually
for the separate surround
modes other than Direct
However,
the same contents
are set for DOLBY/DTS modes
33
Publicidad
Tabla de contenido
