Slime 40061 Manual página 3

INFLATE TIRES
1
1. Securely screw air hose valve connector onto the valve stem.
2. Plug power cord into 12 volt accessory power outlet.
3. Turn on inflator. Inflate tire to manufacturer's recommended air pressure.* Turn
off inflator.
*NOTE: Correct tire pressure can be found in vehicle owner's manual or on driver's
side door jamb.
USING ADAPTER CABLES
Direct Pre-wire Adapter (motorcycles)
1. Attach cables to battery, positive (red) side first.
2. Plug inflator power cord into female 12V plug receptacle.
3. Follow instructions for Inflating Tires.
Direct Connect Adapter (ATV/Mowers)
1. Attach battery clips to battery, positive (red) side first.
2. Plug inflator power cord into female 12V plug receptacle.
3. Follow instructions for Inflating Tires.
2 3