Remote Control - Panasonic SC-HC58 Instrucciones De Funcionamiento

Ocultar thumbs Ver también para SC-HC58:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

AirPlay operations
Cannot connect to the network.
≥ Confirm the network connection and settings. (l 7)
≥ Your wireless network might be set to be invisible. In this case
select "Manual settings" in "Method 3". (l 9)
≥ This unit cannot join a wireless network using WEP security
settings with the WPS methods ("Method 2"). Use "Method 3" to
join the wireless network. (l 8)
≥ Make sure that the multicast function on the wireless network
router is set to on (enabled).
≥ When "D.CONNECT" is used, if the password for "D.CONNECT"
has been changed connect the other device to this unit using the
new password. (l 11)
Cannot connect to the unit.
≥ Display the wireless network name that this unit is connected to
and make sure that the device is connected to the same network.
(l 7)
≥ If "NET STNBY" is set to "OFF", the AirPlay compatible device
cannot be connected when this unit is off.
≥ Turn off the Wi-Fi setting on the AirPlay compatible device, set
"NET STNBY" to "OFF" (l 18) and then turn this unit off and on.
Reconnect the compatible device to the Wi-Fi network and then
select this unit as the AirPlay speakers again.
My wireless network router is WPS PBC
compatible, but the pairing does not work.
≥ If the network is set to be invisible, the push button configuration
does not work. In this case, either make the wireless network
visible while you set up the network for this unit or use "Method 1"
or "Method 3". (l 7, 8)
Playback does not start.
The sound is interrupted.
≥ Simultaneous use with other 2.4 GHz devices, such as
microwaves, cordless telephones, etc., may result in connection
interruptions.
Increase the distance between this unit and these devices.
≥ Do not place this unit inside a metal cabinet, for it might block the
Wi-Fi signal.
≥ Place this unit closer to the wireless network router.
≥ If "D.CONNECT" is set to "ON", place the AirPlay compatible
device closer to this unit.
≥ If several wireless devices are simultaneously using the same
wireless network as this unit, try turning off the other devices or
reducing their wireless network usage.
≥ If the playback stops, check the playback status on the iOS device
or iTunes.
≥ If play does not start (even though the Wi-Fi status indicator lights
in blue and the AirPlay
network router, turn the Wi-Fi connection on the iOS device or
Mac/PC off and on, and then make sure that your home wireless
network is selected.
≥ If the AirPlay
icon is not displayed even if Wi-Fi status
indicator lights in blue, try restarting the wireless network router.
≥ With some iOS and iTunes versions, it may not be possible to
restart the AirPlay playback if the selector is changed (e.g., "CD")
or the unit is turned off, during the AirPlay playback.
In this case, select a different device from the AirPlay icon of the
Music App or iTunes and then re-select this unit as the output
speakers. (l 10)
20
RQT9759
All manuals and user guides at all-guides.com
icon is displayed), restart the wireless
Bluetooth
®
Pairing cannot be done.
≥ Check the Bluetooth
device condition.
®
The device cannot be connected.
≥ The pairing of the device was unsuccessful or the registration has
been replaced. Try pairing the device again. (l 12)
≥ This unit might be connected to a different device. Disconnect the
other device and try pairing the device again. (l 12)
The device is connected but audio cannot be heard
through this unit.
≥ For some built-in Bluetooth
devices, you have to set the audio
®
output to "SC-HC58" manually. Read the operating instructions for
the device for details.
The sound is interrupted.
≥ The device is out of the 10 m communication range. Bring the
Bluetooth
device closer to this unit.
®
≥ Remove any obstacle between this unit and the device.
≥ Other devices that use the 2.4 GHz frequency band (wireless
router, microwaves, cordless phones, etc.) are interfering. Bring
the Bluetooth
device closer to this unit and distance it from the
®
other devices.
≥ Select "MODE 1" for stable communication. (l 12)

Remote control

The remote control doesn't work properly.
≥ The remote control and this unit are using a different code.
(l 21, "REMOTE ")
≥ Is the battery depleted or is the battery inserted incorrectly? (l 4)

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido