Panasonic ES8103 Instrucciones De Uso página 5

Cleaning
We recommend that you clean
your shaver with the self-cleaning
recharger or the "sonic" vibration
turbo-cleaning mode when the
faucet symbol
LCD panel.
1. Disconnect the power cord
from the shaver.
. Apply some hand soap and
some water to the outer foil.
3. Press the OFF/ON switch for
more than  seconds to
activate the turbo mode for
"sonic" vibration cleaning.
appears on the LCD
•
panel.
After about 0 seconds, it
•
will be automatically turned
off, or you can turn it off by
pressing the OFF/ON switch.
4. Remove the system outer foil
and press the OFF/ON switch
for more than  seconds to
activate the turbo mode for
"sonic" vibration cleaning and
clean it with running water.
5. Wipe off any drops of water
with a dry cloth.
6. Remove the system outer foil
and the foil frame to allow
them to dry completely.
All manuals and user guides at all-guides.com
Caution for turbo mode
Shaving in turbo mode may damage your skin. Turn the shaver
•
off and then on again to cancel turbo mode.
Do not place your fingers on the OFF/ON switch while using
•
the shaver. This may cause the shaver to turn off or enter turbo
mode. Place your fingers on the finger rest while using the
shaver.
Lubrication
appears on the
To maintain shaving comfort for a long time, it is recommended
that the oil provided with the shaver is used.
1. Switch off the shaver.
. Apply one drop of oil to each of the outer foils.
3. Raise the trimmer and apply a drop of oil.
4. Switch the shaver on, and run it for approximately five
5. Switch off the shaver, and wipe off any excess oil from the
seconds.
outer foils with a soft cloth.
5