Fermax Veo XS Ambiance Duox Manual De Instalador página 37

Notes:
- The period between the monitor programming entry confi rmation beep and the call
from the panel to program the monitor address must be less than 2 and a half minutes.
- The panel from which the programming takes place must be designated as the master
panel.
3.2 ADMINISTRATOR MENU: INDUCTION LOOP
From this screen, you can enable or disable the induction loop included in the monitor
(according to model).
This screen appears on all monitor models, whether or not the
induction loop is included.
Please ask for the appropriate model if you require this function.
To activate/deactivate the function, press on the corresponding
the loop is switched off, even in models in which the loop is included.
3.3 ADMINISTRATOR MENU: DOORMATIC
3.4 ADMINISTRATOR MENU: RESET SETTINGS
The installer can reset the parameters to leave the monitor with the default confi guration,
and pressing the
The reset affects the user's confi guration parameters, the monitor address and the activ-
ation status of the induction loop (if the model has one).
Note: A blue LED, blinking slowly, indicates that the monitor is not programmed. As the
reset process erases the programmed monitor address, when the LED is fl ashing it will
indicate that the reset is fi nished.
icon and confi rming the option
(depending on confi guration).
.
- icon. By default,
DUOX VEO XS AMBIANCE MONITOR
13