Monitor Address Programming; Induction Loop; Doormatic; Reset Settings - Fermax Veo XS Ambiance Duox Manual De Instalador

3. PROGRAMMING: ADMINISTRATOR MENU Screen
3.1 ADMINISTRATOR MENU: Monitor address PROGRAMMING
The monitor will not function if it has not been programmed!
Note: The blue LED, when blinking slowly, indicates that the monitor is not programmed -
once the monitor address is programmed this will be indicated by a continually lit red LED.
There are three options for programming the monitor from:
A) From the Monitor.
B) From the Panel
C) From the Doorbell.
A) From the Monitor.
It is possible to program the monitor using the on-screen menu.
Programming the call number: Press
gram the dwelling number (numbers from right to left).
Once the monitor address has been programmed, this will be indicated by a continually
lit red LED.
There are several options:

1. Monitor address programming.

2. Induction loop.

3. Doormatic.

4. Reset settings.

5. About.

6. Conversation mode

From Monitor From Panel
on the screen and access the screen to pro-
DUOX VEO XS AMBIANCE MONITOR
11