Disposing Of The Packaging; Disposing Of Your Old Refrigerator; Placing And Installation - Beko BU 1152 HCA Manual

Ocultar thumbs Ver también para BU 1152 HCA:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62
to your mains voltage.
must not be used for connection.
B
A damaged power cable must be
replaced by a qualified electrician.
B
Product must not be operated before
it is repaired! There is danger of
electric shock!

Disposing of the packaging

The
packing
packing materials out of the reach
of children or dispose them of by
classifying
them
with the waste instructions. Do not
dispose them of along with the normal
household waste.
The packing of your refrigerator is
produced from recyclable materials.
Disposing of your old
refrigerator
Dispose of your old machine without
giving any harm to the environment.
dealer or waste collection center of
your municipality about the disposal of
your refrigerator.
materials
may
in
accordance
cut out the electric plug and, if there
are any locks on the door, make them
inoperable in order to protect children
against any danger.

Placing and Installation

1. Install your refrigerator to a place
that allows ease of use.
heat sources, humid places and direct
sunlight.
3. There must be appropriate air
be
ventilation around your refrigerator in
order to achieve an efficient operation.
If the refrigerator is to be placed in
a recess in the wall, there must be at
least 5 cm distance with the ceiling and
at least 5 cm with the wall.
If the floor is covered with a carpet,
your product must be elevated 2.5 cm
from the floor.
4. Place your refrigerator on an even
floor surface to prevent jolts.
5. Do not keep your refrigerator in
ambient temperatures under 10°C.
9
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bu 1150 hca

Tabla de contenido