Publicidad
EN
ENGLISH
Please refer to the separate Safety Instructions booklet for important
product safety information prior to installation or use of the product.
1.
CHARGE YOUR HEADSET
A. Connect the charger cable
to the headset.
B. Plug the charger into a
power outlet.
C. Charge your headset for
at least 1 hour before you
use it for the first time. It
takes approximately 2
hours to fully charge
your headset.
WARNING
headset while it is
connected to the charger.
2. PUT YOUR HEADSET
IN PAIRING MODE
Begin with the headset turned
off. Turn the headset on by
pressing and holding the call
control button. The headset
automatically enters pairing
mode and flashes red/blue.
TIP: If you don't see the
red/blue flash, press and hold
the call control button to turn
your headset off, and then
press and hold the call control
button again until you see the
red/blue flash.
:
Do not use your
3. LOCATE YOUR HEADSET
For most phones, select
Settings/Tools > Connections
> Bluetooth > Search.
Add a Device, then select
520Plantronics.
TIP: If you can't find these
options, see your phone's
user guide for instructions on
locating Bluetooth devices.
ENTER THE PASSWORD
When prompted by your phone,
enter 0000 as the password.
When pairing is successful, the
red/blue indicator turns off. Your
headset is now connected to
your phone and ready to use.
TIP: If you need assistance
pairing your device, please visit
www.plantronics.com/support.
VISIT: www.plantronics.
com/documentation for a
complete user guide and
learn how to take advantage
of advanced features.
Publicidad
