Aux In/ Line Out - auna TT-Classic Light Manual Del Usuario

AUX IN/ LINE OUT

1. Select LINE IN with the function knob and plug an audio cable (not
included) with a 3.5 mm stereo plug at each cable end into the LINE IN
connector (12).
2. Plug the other end of the audio cable into the line OUT connector or
headphone jack of the external audio device to play music from the
external source through your unit's speakers.
3. The volume can be regulated via the unit. For all other functions, use the
external device as usual.
Note: When the LINE-OUT connector of the external device is
connected, only the volume needs to be adjusted via your device. When
the headphone jack of the external device is connected, the volume can
be adjusted on both the external device and the turntable.
EN
19