Adjusting The Picture Centering; Adjusting The Picture Rotation; Adjusting The Picture Size - Sony GDM-90W01T Manual De Instrucciones

Adjusting the picture
centering
The adjustment data becomes the individual setting for each
input signal received.
1 Press the button.
The "CENTER" OSD appears.
2
For vertical adjustment
Press the ¨ ./> buttons.
. . . . to move down
> . . . to move up
For horizontal adjustment
Press the > ?// buttons.
? . . . to move left
/ . . . to move right
The OSD automatically disappears after about 10 seconds.
To turn off the OSD, press the
To reset, press the ? (reset) button while the OSD is on.
The horizontal and vertical centerings are both reset.

Adjusting the picture size

The adjustment data becomes the individual setting for each
input signal received.
1
Press the button.
Å
The "SIZE" OSD appears.
CENTER
2 3 10
button again.
S I ZE
2 3 10
2
For vertical adjustment
Press the ¨ ./> buttons.
. . . . to decrease
> . . . to increase
For horizontal adjustment
Press the > ?// buttons.
? . . . to decrease
/ . . . to increase
The OSD automatically disappears after about 10 seconds.
To turn off the OSD, press the
To reset, press the ? (reset) button while the OSD is on.
The horizontal and vertical sizes are both reset.

Adjusting the picture rotation

The adjustment data becomes the common setting for all
input signals received.
1
Press the Dd button.
The "GEOMETRY" OSD appears.
2
Press the ¨./> buttons.
. . . . to rotate counterclockwise
> . . . to rotate clockwise
The OSD automatically disappears after about 10 seconds.
To turn off the OSD, press the Dd button again.
To reset, press the ? (reset) button while the OSD is on.
The picture rotation and the pincushion settings are both
reset.
Å button again.
GEOMETRY
2 3 10
9
EN
F
D
ES
I
J