Denon DCD-201SA Instrucciones De Operación página 15

(3) Auto function selection (when connected to the 201SA series)
Use this function to switch the function to "CD" and start playing the disc simply by pressing a single button.
2
1
DCD-201SA (this unit)
1 3
C
ON / STANDBY 5 8/6
TRACK INDEX TIME
M S
COMPACT DISC PLAYER DCD-201SA
RC-906
OFF ON
(system remote
SYSTEM
POWER
control unit)
PROG /
DIRECT
1 2 3
CALL
4 5 6
CLEAR
7 8 9
RANDOM REPEAT
10 +10
CD SRS
CD-R TAPE MD TIME EDIT
REV. TIME/
Dolby NR DIMMER
MODE PANEL
RDS BAND TUNING
1
STOP PLAY VOLUME
/SELECT
PRESET
+
-
TAPE
SLEEP FUNCTION MODE
CD
TUNER
MD
CD-R
TAPE
RC-906
REMOTE CONTROL UNIT
All manuals and user guides at all-guides.com
Press the play/pause button while a unit other
than the DCD-201SA (MD recorder or cassette
deck) is playing.
2
PLAY
1 3
7/9
(Main unit) (RC-906)
1
• Playback on the currently playing unit stops.
At the same time, the pre-main amplifier's
function switches to "CD" and the CD starts
playing.
To perform this operation from the system
remote control unit, first turn the remote
control unit's function select switch and set
the function to "CD".
(4) Editing functions (when connected to the PMA-201SA and DRR-201SA)
2 Use this function to automatically edit the tracks on the CD to fit on the tape to be used for recording.
2 The editing function is set from system remote control unit (RC-906) included with the pre-main amplifier (PMA-201SA).
Example: Recording a disc containing 18 tracks with a playing time of 56 minutes onto a 60-minute cassette tape
VOLUME
™ ON / STANDBY ¡ OFF MODE SOURCE DIRECT
PHONES FUNCTION
INTEGRATED AMPLIFIER PMA-201SA
1
PMA-201SA (pre-main amplifier)
2 2
1 3
C
ON / STANDBY 5
8/6
TRACK INDEX
TIME
M S
COMPACT DISC PLAYER DCD-201SA
DCD-201SA
3 3
1
DOLBY REVERSE
ON / STANDBY 5 NR / RESET
REC LEVEL / 0 1
8
L 6
dB -60 -40 -30 -20 -12 -6 -2 0
R
DOLBY NR B
3
STEREO CASSETTE TAPE DECK DRR-201SA
DRR-201SA (Cassette deck)
OFF ON
1
SYSTEM
POWER
PROG /
DIRECT
1 2 3
CALL
4 5 6
CLEAR
7 8 9
RANDOM REPEAT
10 +10
CD SRS
CD-R TAPE MD TIME EDIT
4
REV. TIME/
Dolby NR DIMMER
MODE PANEL
5
RDS BAND TUNING
RC-906 (system remote control unit)
Turn on the power of the pre-main amplifier.
The system's power turns on.
™ ON / STANDBY ¡ OFF
1
SYSTEM
POWER
(PMA-201SA) (RC-906)
Load the CD, then close
2
the disc holder.
2
7/9
Load the cassette tape onto
which you want to record into
3
the cassette deck, then close the
cassette holder.
Set the function select switch to
2
"CD" position.
4 REC Press the edit button and select
CD SRS / REC MUTE
the length of the tape.
9
7
+
• For example, when using a 60-minute (C-60)
tape, press the edit button (EDIT) four times.
(The tape length is the total length of sides A
and B.)
The display switches as follows each time
4
the edit button (EDIT) is pressed:
d
• Approximately 3 seconds after the tape length
is set, the remaining time on side A of the
tape appears.
ENGLISH
ON
5
(DCD-201SA)
5
(DRR-201SA)
TIME EDIT
(RC-906)
15