Risk Of Fire - Beurer LR 400 Instrucciones De Uso

• DO NOT attempt to repair or adjust any electrical or mechanical functions on this device.
Failure to follow this rule shall void your warranty. Apart from the filter, there are no user-ser-
viceable parts inside the device. Any maintenance work must be carried out by qualified
personnel only.
• To reduce the risk of fire or electric shock, do not use this device with a solid-state speed
controller (dimmer).
• Ensure that the openings of the device and the mains cable do not come into contact with
water, steam or other liquids.
• Never reach for a device that is submerged in water. Disconnect the mains plug immediately.
 WARNING

Risk of fire

There may be a risk of fire if the device is used improperly or these instructions for use are ig-
nored.
• Never operate the device underneath a cover, such as a blanket, pillow, etc.
• Never operate the device near petrol or other highly flammable substances.
• To reduce the risk of fire, do not place the cable near heating coils, heating pads, ovens or
radiators.
• Do not operate the device in close proximity to flammable or explosive gas mixtures.
• Keep the device away from sources of heat, as the housing could melt and trigger a fire.
 WARNING
Repairs
• Only specialist personnel may perform repairs on electrical devices. Improper repairs may
subject users to considerable danger. For repairs, please contact Customer Services or an
authorised retailer.
• Do not open the fan unit.
• It is not intended to replace the UVC lamp. It is not permitted for the user to perform the
replacement.
NOTE
Handling
• After each use and before each cleaning, switch off the device and pull the plug out of the
socket.
• Do not place any objects on the device.
• Do not expose the device to high temperatures.
• Protect the device against sunlight and impact, and do not drop it.
• Never shake the device.
• Place the device on a firm, level and dry surface.
• Ensure that the cable does not pose a trip hazard.
16