Adjusting The Brightness And Contrast (Brightness/Contrast); Adjusting The Horizontal Size Or Centering Of The Picture (H-Size/Center); Adjusting The Vertical Size Or Centering Of The Picture (V-Size/Center); Adjusting The Curvature Of The Picture's Sides (Pin/Pin Balance) - Sony HMD-A100 Manual De Instrucciones

Ocultar thumbs Ver también para HMD-A100:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Adjusting the brightness and
contrast
(BRIGHTNESS/CONTRAST)
Brightness and contrast adjustments are made using a separate
BRIGHTNESS/CONTRAST menu.
These settings are stored in memory for all input signals.
1
Move the control button in any direction.
The BRIGHTNESS/CONTRAST menu appears on the
screen.
BR I GHTNESS / CONTRAST
2 6
6 8 . 7 k H z / 8 5 . 0 H z
1 0 2 4 7 6 8
Move the control button m/M to adjust the
2
), and </, to adjust the contrast
brightness (
(6).
The menu automatically disappears after about 3 seconds.
Adjusting the horizontal size or
centering of the picture
(H-SIZE/CENTER)
These settings are stored in memory for the current input signal.
1
Press the center of the control button.
The main MENU appears on the screen.
2
Move the control button to highlight
CENTER, and press the center of the control button
again.
The H-SIZE/CENTER menu appears on the screen.
First move the control button m/M to select the
3
desired adjustment item. Then move the control
button </, to make the adjustment.
Select
To
adjust the horizontal size
H-SIZE
adjust the horizontal centering
H-CENTER
10
2 6
H-SIZE/
Adjusting the vertical size or
centering of the picture
(V-SIZE/CENTER)
These settings are stored in memory for the current input signal.
1
Press the center of the control button.
The main MENU appears on the screen.
2
Move the control button to highlight
CENTER, and press the center of the control button
again.
The V-SIZE/CENTER menu appears on the screen.
First move the control button m/M to select the
3
desired adjustment item. Then move the control
button </, to make the adjustment.
Select
To
adjust the vertical size
V-SIZE
adjust the vertical centering
V-CENTER
Adjusting the curvature of the
picture's sides (PIN/PIN BALANCE)
These settings are stored in memory for the current input signal.
1
Press the center of the control button.
The main MENU appears on the screen.
2
Move the control button to highlight
BALANCE, and press the center of the control
button again.
The PIN/PIN BALANCE menu appears on the screen.
First move the control button m/M to select the
3
desired adjustment item. Then move the control
button </, to make the adjustment.
Select
To
PIN
expand or contract the picture sides
shift the picture sides to the left or right
PIN BALANCE
V-SIZE/
PIN/PIN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hmd-a200

Tabla de contenido